For Fabricators

Glove System’s simple interface and workflow are designed to be used by fabrication shop workers and QA/QC personnel. The system requires the 3D model of the assembly to be loaded in order to produce a comparison heat map. Through Glove’s cloud capabilities, the results can be shared and viewed in 3D by project stakeholders providing supply chain visibility

Setup assembly

Step 1: Setup Your Assembly

Once an assembly is ready for QA/QC, the craft worker uses the 3D scanner to take several (3 or more for accurate 3D measurement) laser pictures of your assembly.

Step 2: Scan and Match

Overlay

Once the 3D image of the as-built has been acquired, using your 3D model, Glove Systems will overlay the acquired image on the model and provide an analysis.(on the left is the point cloud generated from the design and on the right is the captured point cloud by the laser scanner)

Step 3: Analyze the Overlay

Analyze

A heatmap indicates dimensional deviations. The tolerance for the heatmap can be set by the user and can be different for different parts of an assembly. A green color indicates compliance with the design tolerance; red areas are indicators of out of tolerance fabrication.

Step 4: Store and Share the Results

Share

After completing the final analysis, the results (digital twin, scan, and heatmap) are securely stored in the cloud and can be easily shared with other team members and the project owner. The cloud version gives the same functionality (rotation, tolerance adjustment, the measurement between point) as the workstation version

Step 5: Store and share Photos

Photo

Fabricators can take photos of an assembly and share them along with the point cloud. The phots can be shared with project owners for review and verification

Interested?